ㆍComposed of 10 experimental modules and 16 sensor units
ㆍPossible to practice for various electronic circuits such as sensor detecting, amplifying and converting
ㆍPossible to study various sensor characteristics to apply in various fiends
ㆍPossible to study the principal of A/D and D/A for signal processing
Possible to practice various sensors such as temperature, photo sensor, encoder sensor, ultrasonic sensor, gas sensor, humidity sensor, hall sensor, proximity sensor, presser sensor, sensor switch and etc.
Possible to study the principal of signal detection form sensor. Possible to study how to process signal to suitably use after amplifying of converting according to each signal aspect.
The value of amplified analog signals are displayed with digital value through LED. Possible to interface with other digital signal equipment like a computer. Possible to display voltage value with analog signal after converting from digital value of digital signal equipments. Possible to applicable experiment such as motor speed control.
OP-AMP UNIT (CPE-SN2007-M1)
ㆍCoupling : AC & DC
ㆍAmp. Mode : Inverting, Non-inv, Difference, DC offset, Comparator
ㆍDC-offset Control : -15V ~ 0 ~ +15V
ㆍDC output : ±15V, 0.3A
ㆍPower : AC220V, 50/60Hz
ㆍSize : 345(W) x 120(H) x 220(D)mm
SIGNAL CONVERTER UNIT (CPE-SN2007-M2)
ㆍA/D conversion : Successive Type
ㆍAnalog input : DC 0 ~ 10V
ㆍDigital output : 8bits TTL Level
ㆍD/A conversion : Current Summing
ㆍDigital input : 8bits TTL Level
ㆍAnalog output : DC 0 ~ 10V
ㆍConversion rate : A/D : 100㎲, D/A : 50㎲
ㆍDC output : ±15V, 0.3A
ㆍPower : AC 220V, 50/60Hz
ㆍSize : 345(W) x 120(H) x 220(D)mm
TEMPERATURE SENSOR (CPE-SN2007-01)
ㆍDetecting Circuit : Wheatstone Bridge & Amp.
ㆍTemperature Source : Heater and Cooler
ㆍResistance Sensing : 500Ω ~ 5㏀
ㆍHeater & Fan Control Input : DC 5 ~ 15V
ㆍSensor Type : Thermocouple & Thermistor
ㆍPower : DC±15V, 1A
PHOTO SENSOR (CPE-SN2007-02)
ㆍSource Bias : DC 0~30mA
ㆍAC 100㎐ ~ 10㎑ (Digital Counter)
ㆍSensing Range : 0~200mm
ㆍSensor : LED, Photo-TR., Cds
ㆍPower : DC±15V, 1A
ROTATION SENSOR (CPE-SN2007-03)
ㆍInput Voltage : DC 5V
ㆍOutput Waveform : Square Wave
ㆍOutput Phase : A, B
ㆍResolution : 100 Pulse/Rotation
ㆍResponse : 25kHz
ㆍPower : DC±15V, 1A
ULTRASONIC SENSOR (CPE-SN2007-04)
ㆍNominal Frequency : 40kHz
ㆍSensitive Level : More then -67dB
ㆍReceiving BW : 6kHz(-74dB) Approx.
ㆍTransmitter Level : More than 110dB
VIBRATION
ㆍFrequency : 10Hz ~ 1kHz
ㆍSensor Output : 40mV/1G Approx.
GAS SENSOR (CPE-SN2007-05)
ㆍCircuit Voltage : Vc : 24V Max. (AC or DC)
ㆍHeater Voltage : Vh : 5V (AC or DC)
ㆍDetecting Gas : LPG, LNG, Methane
ㆍSensing Range : 500 ~ 10,000ppm
ㆍName of Type : TGS-813 (FIGARO)
ㆍPower : DC±15V, 1A
HUMIDITY SENSOR (CPE-SN2007-06)
ㆍHumidity Range : 30~90%RH
ㆍTemp. Range : 0 ~ 60℃
ㆍSensor Output : DC 1 ~ 3V (at 30~90% RH)
ㆍPower : DC±15V, 1A
HALL SENSOR (CPE-SN2007-07)
ㆍMaterial : GaAs
ㆍHall Voltage : 55 ~ 140mV
ㆍInput Resistance : 450 ~ 900Ω
PROXIMITY SENSOR
ㆍDetective Distance : 0 ~ 5mm
ㆍDetective Object : Magnetic Substance
ㆍFrequency : 500㎐
PRESSURE SENSOR
ㆍMeasuring Range : 0~1kg/cm² (Max. 2kg/cm²)
ㆍOutput : 1~5V (Approx.)
ㆍCompressor : Handy Type
SENSOR SWITCH (CPE-SN2007-08)
ㆍReed & Mercury & Limit Switch
ㆍContactor : SPST
ㆍContacting Current : 0.1A (24V)
ㆍLinear Movement
ㆍMoving Distance : 80mm
ㆍDriving Motor : 0 ~ 60RPM
ㆍPower : DC±15V, 1A